|
Weedless V10 Rudder |
|
|
|
Written by Paul Jacob
|
|
Tuesday, 31 January 2006 |
|
Page 4 of 4
Step 5 Finished rudder
It sheds weeds just fine (whew!). I then took it off the boat for final smooth sanding, then coating with a UV resistant varnish. The varnish provides a gloss coat for the surface and will keep the epoxy from degrading in the sunlight. I could have added pigment to the epoxy to avoid the varnish but I wanted to see the balsa core and it also adds a gloss coat.
That's about it. I'm currently working on another rudder just because I have the materials on hand and I really want to get a good shape this time but the first one is very good and the original stock rudder is now my spare.
| 
| The rudder, prior to trimming...
| ... and in place - note the weed deflector in front of the rudder. |
(Editor: the author may be contacted at:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
)
|
|
|
Subscribe to this comment's feed